KB8.0 spider crane
KB8.0 PRODUCT INTRODUCTION
KB8.0 crawler crane (spider crane), widely used in substation electrical equipment maintenance and installation, mechanical and chemical workshop equipment maintenance and installation, glass curtain wall and other small space occasions.
The largest folding crane product, with support leg safety protection function. KB8.0 mini crawler crane has a large operating radius, can carry out a variety of lifting operations, the greatest possible to meet your needs.
Specifications
| Model |
KB8.0 |
|
| Specification |
8.00t x 2.5m |
|
| Maximum Working Radius |
15.7m x0.45t |
|
| Maximum Ground Lifting Height |
17.8m |
|
| Winch Device | Hook Speed |
10m/min 4 fall |
| Rope |
O12mmx 120m |
|
| Telescopic System | Boom Type |
Full automatic 5 section |
| Boom Length |
4.65m~16.4m |
|
| Telescopic Length/Time |
34sec |
|
| Up and Downs | Boom Angle/Time |
0~80° /24.5sec |
| Slew System | Slew Angle/Time |
360° continuous/2.1rpm |
| Outrigger | Outrigger Active Form |
manual adjustment for the 1 section. Automatic for the 2,3 section |
| Maximum Extended Dimensions |
5670mm x 5510mm x 5030mm |
|
| Traction system | Walking Way |
Hydraulic motor |
| Walking Speed |
0~1.5km/ h |
|
| Grade Ability |
20° |
|
| Ground Length x Width |
1720mm x 320 mm |
|
| Ground Pressure |
49.0kpa （ 0.50 kgf/cm2） |
|
| Diesel Engine | Model |
4TNV88（YANMAR） |
| Displacement |
2.19L |
|
| Maximum Output |
25.2kw/2200min-1 |
|
| Starting Method |
Electric starting |
|
| Fuel |
diesel |
|
| Electric Motor | Model |
YYB160M-4 （Three phase AC） |
| Working Voltage |
380V （Hz50） |
|
| Power |
11Kw |
|
| Dimension | Length x Width x Height |
5033mm x 1560mm x 2278mm |
| Weight | Vehicle Weight |
6500kg |
| Tank Capacity |
100L |
|
| Safety Devices | Torque limiter, Status lights Alarm device, Emergency buttonx Overturn-preventing system, interlock control system, Onekey leveling | |
Total rated load outriggers at maximum positions
| 4.65(m) | 4.65-7.62(m) | 7.62-10.5(m) | 10.5-13.47(m) | 13.47-16.4(m) | |||||
| Working Radius (m) | Rated Load (t) | Working Radius (m) | Rated Load(t) | Working Radius (m) | Rated Load(t) | Working Radius (m) | Rated Load(t) | Working Radius (m) | Rated Load(t) |
| <2.5 | 8 | <2.5 | 6.8 | <3.5 | 5.2 | <4 | 4.4 | <5 | 2.85 |
| 3 | 7.2 | 3 | 6.5 | 4 | 4.85 | 4.5 | 3.92 | 5.5 | 2.45 |
| 3.5 | 6.15 | 3.5 | 5.8 | 5 | 3.8 | 5 | 3.5 | 6 | 2.2 |
| 4 | 5.2 | 4 | 5 | 6 | 2.6 | 6 | 2.4 | 7 | 1.95 |
| 4.1 | 4.8 | 5 | 3.95 | 7 | 2.3 | 7 | 2.3 | 8 | 1.55 |
| 6 | 2.8 | 8 | 1.9 | 8 | 1.8 | 9 | 1.35 | ||
| 7 | 2.35 | 9 | 1.5 | 9 | 1.5 | 10 | 1.15 | ||
| 9.9 | 1.2 | 10 | 1.2 | 11 | 0.9 | ||||
| 11 | 0.95 | 12 | 0.75 | ||||||
| 12 | 0.8 | 13 | 0.65 | ||||||
| 12.8 | 0.7 | 14 | 0.56 | ||||||
| 15 | 0.49 | ||||||||
| 15.7 | 0.45 | ||||||||
Dimensions
Working radius figure & Application
